Showing posts with label Tiling. Show all posts
Showing posts with label Tiling. Show all posts

Sunday, January 1, 2012

Tiling On Top Of Tiles - The Pros And Cons

!±8± Tiling On Top Of Tiles - The Pros And Cons

An extremely perplexing choice for you to make whenever re-tiling is whether or not  to lay tiles over current tiles or perhaps get rid of the outdated ones to start with. It shouldn't become an issue if you decide to lay over the current ones on the wall, however there are still some factors to make note of whilst thinking about laying over ones already in place.

This way of doing things is actually a poor job in all honesty, however, if you have to do it this way, basically you need to be sure they are free of moisture prior to starting. They do not require any form of roughing up or even scoring so to speak. You should definitely establish battens in order that they will not slide in addition to staying level. In order to tile directly over old,  current ones you should, work with an appropriate cleaning agent or perhaps some form of suitable cleaning solution that will eliminate most of the debris and grease and so forth to them, achieve this through horizontally as well as vertically marking your tiles employing a purpose scrubber, this can help to attach the old to the  new.

If you're contemplating tiling directly onto others that have been on the wall for many years, you'll need to bear in mind that this makes the newly laid tiles proud of the wall. Because you have tiled on top of the old ones and not removed them, this can cause problems when you consider such things as door frames and skirting boards.

The vast majority of instances when doing such a job as this is, it's significantly better to clear out the current tiles. This might mean your task will take longer as well as be a lot more time intensive but ones final tiling outcome will undoubtedly be clearly deserving of the actual additional effort and time.

One more reason you want to stay away from tiling on top of ones already in place, besides time and expense, is the fact that for those who have a superior quality restroom there's a danger of damaging the wall surfaces whilst taking and knocking the old ones off the wall. This can be a possible issue although it is possible to avoid any damage if you take your time and prepare properly.

Preparing well is the solution to the above method. But in all honesty it is far better to make yourself enough time to strip the wall back to it's bare surface and start from there. It may seem like more work but very often the end results are far batter


Tiling On Top Of Tiles - The Pros And Cons

Cheep Simplehuman Coupon Code Sundance Spa Heaters Top Quality

Sunday, December 4, 2011

Tiling a Shower Stall Starts with a Shower Pan

!±8± Tiling a Shower Stall Starts with a Shower Pan

Building a Custom Ceramic Tile Shower

The most important feature in a ceramic tile shower stall is the shower pan. The shower pan channels water to the drain and prevents the shower from leaking. Consequently it is critical that the shower pan be installed correctly and that it is waterproof and durable.

The shower pan is actually a mortar bed consisting of a flexible shower pan liner sandwiched between two layers of mortar. The shower stall walls are framed with 2x4 studding and faced with some type of backerboard underlayment designed for receiving ceramic tile.

The installation of a shower pan starts with the spreading of a layer of mortar. The mortar needs to be sloped properly to enable water to run off towards the drain. The flexible plastic shower pan membrane liner is then installed on top of the sloped mortar bed.

The shower pan membrane liner should be cut to size and hand molded into the shower base.

Note: The shower pan should be cut to size such that several extra inches of shower pan material can be run up the shower stall side walls to enable the shower pan to be secured with nails to the studs. Also, the shower pan should be installed prior to the installation of backerboard on the shower walls.

After the shower pan membrane is secured, the second layer of mortar should be installed in the base of the shower, again maintaining the slope of the mortar towards the drain.

Once the shower pan mortar bed has set up, you can install the backerboard to the walls and begin to install the ceramic tiles.

Start the installation of tiles in the center of the shower pan area and work your way outwards.

Next, install ceramic tiles on the walls. Use a plumb line to run straight lines down the length of the walls. Position the plumb line at the ceiling and centered on a wall. Snap the line, so that you have a vertical line running the length of the wall.

Next, Install your tiles outwards from the line toward the edges of the wall. Repeat this process for all the walls.

For tile cutting, a wet saw works best, as you can obtain very accurate cuts and minimize ceramic tile waste.

After the ceramic tile has had 24-48 hours to set up, grout can then be applied to the tile.

Finally a sealer should be used on the grout to minimize moisture seeping through the grout lines.

For more information on installing a shower pan membrane liner, see the Shower Pan Membrane Liner Installation EBook from http://www.HomeAdditionPlus.com The Shower Pan Membrane Liner EBook will quickly teach you the step-by-step process for installing the shower pan membrane liner correctly. It includes instructions on framing the shower stall, pouring the pre-slope and shower base mortar, and installing the shower pan membrane liner.


Tiling a Shower Stall Starts with a Shower Pan

Last Minute Ben Ten Action Figures Promotion Cheap Pressure Cookers


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。







Sponsor Links